The Overlock Foot for Dual Feed facilitates finishing edges professionally and sewing seams similar to overlocking. It is also particularly suitable to create decorative cuffs and seams in the most common knitware fabrics. The Overlock Foot for Dual Feed is provided with a recess on the back side of the presser foot to activate the integrated Dual Feed. This allows an even feed of several fabric layers. Fabric waves will be reduced for elastic fabrics.
Switch off the machine. Attach the foot as described in the instruction manual and activate the Dual Feed.
Applications:
- Overlock seams
- Edge neatening
- Visible hems on stretch fabrics
Stitch type: overlock stitches
Stitch width: basic value, adjusted according to the stitch/fabric / Important: The stitch width can only be adjusted so that, when changing the stitch width, the needle does not strike the pins or bar of the presser foot.
Stitch length: basic value, adjusted according to the stitch/fabric
Feed dog: raised
Important: Use new needles, ball point needles or stretch needles.
Place the fabric under the presser foot so that the fabric edge is against the black guide. Sew, ensuring that, when the needle moves out to the right, it always sews into empty space just to the right of the bar so that there is enough thread to prevent the edge from puckering.
