Lentas piešūšanas pēdiņa
Šauras lentas piešūšanai. Pateicoties regulējamai vadotnei, dažāda platuma var tikt precīzi pielāgotas šuvei.
Šauras lentas piešūšanai. Pateicoties regulējamai vadotnei, dažāda platuma var tikt precīzi pielāgotas šuvei.
This accessory is compatible with the following machines:
1. Set the machine for a 4-thread overlock or a wide 3-thread overlock (left or right needle) depending on the tape width.
2. Tapes of up to 3/8” (10 mm) width can be used.
3. Raise the presser foot and snap on “Ribbon-couching foot”.
4. Place tape in guide (1) from the right.
5. Loosen set screw (2), push tape guide (3) to right to fit the width of the tape.
6. Lower the foot, sew a few stitches to fix the tape.
7. Place fabric underneath and sew.
Funkcijas |