In combination with the Buttonhole Foot with Slide, this tool improves feed when sewing buttonholes on thick and fleecy materials, as well as on edges.
• 1× Adapter plate (1)
• 1× Feeding rail (2)
Raise the presser foot.
Set needle to topmost position.
Attach the adapter plate to the buttonhole foot with slide from the front.
Push the feeding rail into the opening of the adapter plate from below.
To measure the length, clamp the button in the buttonhole foot with slide.
Fit the buttonhole foot with slide.
Position the fabric between the buttonhole foot with slide and the feeding rail.
Set the buttonhole on the machine.
Lower the presser foot.
Lower the buttonhole lever. (Refer to the instruction manual of the machine)
Sew the buttonhole.
